Workshop journal

Laying Out a Workshop Bench and Storage Run

Notes from the Actionchoiceflow floor on tools, benches and how tradies around Brisbane actually use them.

The biggest mistake people make with a workshop fit-out is buying storage before they map the floor. They fill a wall with shelving, then realise there is nowhere to swing a sheet of ply or park a project halfway through. Measure the wall first, then work out how much clear floor you actually need. A 2.4m bench against one wall and a 900mm walkway in front is a good starting point for most home sheds. Decide where your dirty work happens before you bolt anything down. Welding, grinding and cutting generate sparks that travel further than you think, and they will land on whatever you have stored nearby. Keep the fabrication bench away from open shelving or storage bins. If the shed is small, run the shelving high and the bench low, so sparks hit the bench surface and not the boxes above. Bench load ratings are worth reading properly. A 2mm steel top on a 50mm box frame will hold around 600kg spread evenly, which is plenty for a vice, a small press and day-to-day work. But the rating assumes the weight sits over the legs or a cross member. If you bolt a vice to the middle of an unsupported span, you will see the top flex under load and eventually crack the coating. Plan the vice position before you drill anything. Rolling storage sounds like a luxury until you use it. A cabinet on braked castors lets you pull the whole drawer stack to the machine you are working at, then push it back out of the way. On a two-bay workshop it is the single change that frees up the most usable floor. If you have the budget for one upgrade on top of a bench and shelves, make it a decent rolling cabinet with ball-bearing slides.
Actionchoiceflow stocks cordless tools, workshop benches and steel storage at 275 Grey Street, South Brisbane. Bring your questions to the counter or call +61 7 3168 4259.
Straight to the counter

Want advice for your own setup?

Tell us what you are building and the tools you already own. We will come back with a shortlist, a price and a lead time from the South Brisbane branch.